roboRIO Team Number Setter
The roboRIO Team Number Setter is a cross-platform utility that can be used to set the team number on the roboRIO. It is an alternative to the roboRIO imaging tool for setting the team number.
In Visual Studio Code, press Ctrl+Shift+P and type WPILib
or click the WPILib logo in the top right to launch the WPILib Command Palette. Select Start Tool, then select roboRIOTeamNumberSetter.
Connect to the roboRIO over USB to use the tool, as this is the simplest method when the team number hasn’t been set.
Setting Team Number
Enter your team number in the Team Number field and select Set team to xxxxx. This will take about a second, then press the Reboot button to reboot the roboRIO so the new team number takes effect.
Enabling/Disabling Webserver
The roboRIO’s webserver provides some debuging and enables some configuration. However, it also takes memory away from the robot program. You can disable it by clicking on the Disable Web Server button. If you’d like to enable it again, you can click Enable Web Server.
roboRIO Identification
Clicking the Blink button will cause the roboRIO’s Radio LED to blink a few times to help identify the roboRIO.